Recuperator
CLIMTEC ™
Why do they choose CLIMTEC?
Efficiency factor up to 93%
Intake air flow up to 1000 sq. m.
"Auto" Function
Autonomous control of ventilation system operation.
Individual solutions
GET A CONSULTATION
Humidity
Control of humidity levels in the premises is performed automatically that helps to fight against fungus and mould formation and allergy.
Ventilation.
High power efficiency
Installation
Quick installation allows to save significant costs on installing in comparison with centralized ventilation systems.
CLIMTEC ™
LLC " CLIMTEC" - is the Ukrainian manufacturer of intake-extract ventilation systems with heat recuperation which makes it possible to ventilate premises of 8 m² and bigger.
Due to the implementation of modern technologies and European quality, ventilation system designing with the use of CLIMTEC trade mark has made it possible to go beyond the boundaries of Ukraine and is widely used in the near-abroad countries.
Apart from ready-made recuperators of their own production, company engineers design any ventilation systems which meet all the specific requirements. Besides they take into consideration peculiarities of location, installing complexity and other parameters for convenient operation of equipment in the future. Our specialists will help you to install or restore ventilation systems. Operational decisions of specific tasks is provided by partnership with reliable and trusted suppliers of necessary component parts.
Decentralized ventilation equipment with heat recuperation
Professional means for fungus removal Brillux Antimuffa
CLIMTEC passive
intake valves
Extract wall-mounted ventilators
INDIVIDUAL SOLUTIONS
There are available individual solutions for Climtec recuperators. You can choose any colour optionally except for the white one. This option makes it possible to harmoniously incorporate a recuperator in the interior design.
Intake and extract spacing
Intake and extract spacing, lengthening and usage of a rotary unit allows to solve engineering tasks where standard recuperators are not suitable.
Aluminium heat exchanger works in a wide temperature range and an oxide film prevents from oxidizing and in its turn fungus appearance. The construction of a heat exchanger provides for the square of heat exchanging up to 3 m2.
Specially designed air heating element supports comfortable microclimate in the premises even in the strongest frost. A heating element in a recuperator is situated behind the heat exchanger from the side of the premises; when operating, it heats up the air which gets into the premises. This heating element has maximum effective heating up at a relatively small consumed power of a heater.
If it is necessary, all air flows can be fully blocked. The valve of blocking the flows prevents from wind blowing in, draughts and noise. It also excludes a possibility of frost penetration into a recuperator at extremely low temperatures.
MAIN TASKS
THAT ARE SUCCESSFULLY FULLFILLED BY CLIMTEC RECUPERATORS
VENTILATION
Protection from dust and outside odours
HEALTHCARE
Protection from fungus and its prevention
ENERGY SAVING
Save costs when ventilating
CLIMTEC recuperator model line
RD 100 Base
Intake – 40 m3/h, Extract – 40 m3/h;
Simultaneous intake and extract;
Electricity consumption up to 7 W*h;
Efficiency up to 93%, Recommended area of the premises, m² 15;
Diametrical plate aluminum heat exchanger
RD 100 Standart
Intake – 40 m3/h, Extract – 40 m3/h;
Simultaneous intake and extract;
Electricity consumption from 3 to 6 W*h;
Efficiency up to 93%, Recommended area of the premises, m² 15;
Diametrical plate aluminum heat exchanger
RD 125 Base
Intake – 60 m3/h, Extract – 60 m3/h;
Simultaneous intake and extract;
Electricity consumption from 3 to 6 W*h;
Efficiency up to 93%, Recommended area of the premises, m² 25;
Diametrical plate aluminum heat exchanger
RD 125 Standart
Intake – 60 m3/h, Extract – 60 m3/h;
Simultaneous intake and extract;
Electricity consumption from 3,5 to 7 W*h;
Efficiency up to 93%, Recommended area of the premises, m² 25;
Diametrical plate aluminum heat exchanger
RD 150 Standart
Intake – 100 m3/h, Extract – 100 m3/h;
Simultaneous intake and extract;
Electricity consumption from 26 to 100 W*h;
Efficiency up to 93%, Recommended area of the premises, m² 40;
Diametrical plate aluminum heat exchanger
RD 200 Standart
Intake – 185 m3/h, Extract – 185 m3/h;
Simultaneous intake and extract;
Electricity consumption from 8 to 300 W*h;
Efficiency up to 93%, Recommended area of the premises, m² 70;
Diametrical plate aluminum heat exchanger
RD 200+ Standart
Intake – 240 m3/h, Extract – 240 m3/h;
Simultaneous intake and extract;
Electricity consumption from 13 to 300 W*h;
Efficiency up to 93%, Recommended area of the premises, m² 90;
Diametrical plate aluminum heat exchanger
